Set up and use the Check-in Validation Checklist

Purpose Configure check-in rules and use the Check-in Validation Checklist to identify and resolve outstanding requirements before check-in.
Best for Admins, Front Desk, and Managers/General Managers
Use this when Your property wants a consistent pre-check-in process, or staff need to understand what is preventing an arriving guest from being checked in.
Requirements An admin must enable at least one check-in rule before the checklist appears on eligible reservations.
Expected result Staff can see what is ready, what still needs attention, and what must be resolved before moving the guest in-house.
Limitations The checklist does not apply to check-ins completed through the public API or bulk check-in.

Introduction

The Check-in Validation Checklist gives properties a consistent way to define what "ready to check in" means. Instead of relying on staff to remember separate balance, guest-information, room-readiness, and key checks, Cloudbeds PMS brings the applicable items together in the reservation.

The workflow has two parts. Admins configure the property's check-in rules, and Front Desk staff use the resulting checklist during check-in. Nothing changes for a property until at least one check-in rule is enabled.

Start with the role guidance below, then follow the configuration or check-in workflow that applies to you.

Table of contents

Who this affects and how

The same checklist connects property setup with the daily arrival workflow. Use the role column to identify where your responsibility begins.

Role Main responsibility What to do
Admin Define the property's check-in rules. Enable the checks the property needs, arrange their order, and configure available enforcement options.
Front Desk Complete the pre-check-in requirements. Open the reservation, review the checklist, resolve blocking items, and skip eligible warnings when allowed.
Manager/GM Monitor check-in consistency and exceptions. Review reservation activity when staff bypass eligible warnings or make check-in exceptions.

How the Check-in Validation Checklist works

Once at least one check-in rule is enabled, eligible reservations display a Check-in checklist in Reservation Details. The checklist appears for reservations in Confirmation Pending, Confirmed, or No-show status.

Each checklist row represents a condition that may need attention before the guest can be checked in. The status updates as staff resolve the underlying reservation information, so the checklist acts as a live readiness view rather than a separate task list.

 Required and Warn: A check configured as Required normally must be resolved before check-in. A check configured as Warn can be bypassed when allowed. Guest Balance has additional permission-based behavior described later in this article.

In the example below, the reservation has a balance warning, a blocking dirty-room requirement, a room-key warning, and completed guest details. The check-in action remains unavailable while the blocking requirement is unresolved.

Reservation Details showing the Check-in Validation Checklist with balance due, dirty room, room keys, and completed guest details before check-in

When a check is bypassed, the available exception information is recorded with the reservation activity so managers can review what happened during check-in.

Set up check-in rules

Admins configure the checklist from the property's arrival and departure policy settings. Use this section to decide which checks should appear and how the Front Desk team should handle them.

  1. Go to Account Settings.
  2. Select Property.
  3. Open Policies.
  4. Select Arrival & Departure.
  5. Scroll to Check-in rules.
  6. Enable the checks your property wants to include.
  7. Drag enabled checks into the order your team should follow.
  8. Configure the available enforcement option for each check.

The Check-in rules area groups the property's enabled checks in one place. The example below shows Balance due, Clean Room Assigned, Issue keys, and Guest details.

Property Policies Arrival and Departure settings showing enabled Check-in rules and their Warn configuration

Configure the Guest details check

Guest details is different from the other checklist items. Its enforcement is controlled by the property's Guest Information configuration rather than a separate Required/Warn selector in Check-in rules.

From Check-in rules, use Guest detail settings to open the related guest-information configuration. You can also choose whether the check applies to primary guests, additional guests, and which accommodation check-in should trigger the verification.

Check-in rules Guest details settings showing primary and additional guest requirements and verification timing

In Account Settings > Guests > Guest Information, the Front desk check-in setting controls how the selected Guest Information Template is enforced during check-in.

Guest Information settings showing the Front desk check-in enforcement menu for the selected Guest Information Template

 Guest Details does not have its own Required/Warn selector in Check-in rules. The checklist follows the Front desk check-in behavior configured for the property's Guest Information Template.

Use the checklist during check-in

Front Desk staff use the checklist from Reservation Details. Regardless of where check-in begins, the reservation is the place to review and resolve the outstanding requirements.

Open the checklist

The exact first click depends on where you are working, but each path leads to the same checklist in Reservation Details:

  • Dashboard: Open the guest or reservation, expand Reservation Details, and review the Check-in checklist on the left side.
  • Classic Calendar: Select the reservation and start check-in. If the reservation is not ready, open the reservation when prompted and resolve the checklist.
  • New Calendar: Select the reservation, open Reservation Details, expand the panel, and review the Check-in checklist on the left side.

 If check-in starts from the Calendar or Dashboard and the reservation does not meet the configured requirements, Cloudbeds stops the check-in and directs the user to the reservation so the outstanding checks can be resolved.

Resolve the checklist

  1. Review the checklist and identify any warning or blocking item.
  2. Select an outstanding item to open the related reservation action or area.
  3. Resolve all blocking requirements.
  4. For an eligible warning, use Skip when allowed and provide a reason when required.
  5. Complete check-in once the reservation meets the applicable requirements.

Use the checklist for multi-accommodation reservations

For reservations with more than one accommodation, the checklist provides a separate view for each accommodation. Use the arrows in the checklist card to move between them and confirm the readiness of the specific room being checked in.

In the first example below, the checklist is on 1 of 3. The selected accommodation still has an outstanding balance, a dirty-room requirement, and a room-key warning, so its check-in action is unavailable.

Multi-accommodation reservation showing checklist 1 of 3 with balance due, dirty room, and room-key warnings for the selected room

In the next example, the checklist is on 3 of 3. The selected accommodation has a paid balance and clean room, leaving only the advisory key reminder, so the check-in action is available for that room.

Multi-accommodation reservation showing checklist 3 of 3 with balance paid, clean room, advisory room-key reminder, and available check-in action

 The balance requirement applies to the reservation as a whole. Other applicable checks are evaluated for each accommodation as staff move through the reservation.

Understand each validation check

Each checklist item reflects an existing part of the reservation workflow. The table below explains what each check evaluates and when another Cloudbeds PMS setting or feature affects its behavior.

Check What it validates Important behavior
Guest Balance Whether the reservation has an outstanding balance. Applies to the reservation as a whole. When configured as Required, users with permission to check in with a balance may still be able to bypass the requirement according to their permissions.
Guest Details Whether the required guest information for check-in has been completed. Uses the property's Guest Information Template and its Front desk check-in configuration instead of a separate Required/Warn selector in Check-in rules.
Room readiness Whether an accommodation is assigned and, when applicable, ready for the guest. Room assignment always applies. The cleanliness check applies when housekeeping is enabled. See Manage Housekeeping in Cloudbeds PMS for room-status workflows.
Room keys Whether room keys have been issued. This check is advisory and does not block check-in. Without a supported door lock integration, it remains a reminder and does not turn green automatically.

Frequently asked questions

Expand the questions below for configuration and enforcement details that do not apply to every check-in.

How do I turn the checklist on?

There is no separate checklist on/off switch. The checklist becomes active when an admin enables at least one check under Account Settings > Property > Policies > Arrival & Departure > Check-in rules.

Which checks can staff skip?

Checks configured as Warn can be bypassed when allowed. Checks configured as Required normally need to be resolved before check-in.

Guest Balance is an exception because existing check-in-with-balance permissions can affect whether a user may proceed when that requirement is configured as Required.

Where can I review a skipped check?

Review the reservation's Activity tab. Check-in exceptions are recorded with the reservation so available skip information can be reviewed later.

Why does Guest Details not have its own Required/Warn setting?

Guest Details follows the property's Guest Information Template and the Front desk check-in behavior configured there. This keeps the guest-data requirement in one configuration area.

What happens when check-in starts from the Calendar or Dashboard?

The same configured rules are evaluated. If the reservation is not ready, check-in is stopped and the user is directed to the reservation to resolve the outstanding requirements.

Does the checklist apply to API or bulk check-ins?

No. Check-ins completed through the public API or bulk check-in are not covered by the checklist.

Troubleshoot the checklist

Expand the issue that matches what you are seeing. If the behavior remains incorrect after the listed checks, gather the reservation, affected checklist item, and actions already attempted before contacting Support.

The checklist does not appear on the reservation

Confirm that at least one rule is enabled under Account Settings > Property > Policies > Arrival & Departure > Check-in rules.

Also confirm that the reservation is in Confirmation Pending, Confirmed, or No-show status.

A check does not clear after I resolve it

Reopen or refresh the reservation so the checklist can evaluate the current reservation information again.

If the check remains incorrect, contact Support with the reservation, affected check, the update you completed, and what the checklist still shows.

I cannot skip a check

Confirm whether the check is configured as Required. Required checks normally must be resolved before check-in.

Guest Balance may behave differently for users who have permission to check in a reservation with an outstanding balance.

The room-keys check does not turn green

If the property does not use a supported door lock integration, the room-keys check remains an advisory reminder and does not turn green automatically. It does not block check-in.

The room-readiness check is still outstanding

Confirm that an accommodation is assigned to the guest. If your property uses housekeeping, also confirm that the applicable room status meets the property's check-in requirements.


Now that you understand how the checklist connects property setup with the check-in workflow, use these resources for the three related areas customers are most likely to need next: property policies, the check-in process itself, and guest-information requirements.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.